Main Specifications
Product Description: Transcend SSD420I Industrial - solid state drive - 32 GB - SATA 6Gb/s
Type: Solid state drive - internal
Capacity: 32 GB
NAND Flash Memory Type: Multi-level cell (MLC)
Form Factor: 2.5"
Interface: SATA 6Gb/s
Data Transfer Rate: 600 MBps
Features: Native Command Queuing (NCQ), shock-resistant, flash bad-block management, TRIM support, StaticDataRefresh Technology, Advanced Power Shield, Advanced Garbage Collection, Error Correction Code (ECC), DDR3 DRAM Cache, DEVSLP SATA low power mode, Advanced Global Wear Leveling, Transcend TS6500 controller, S.M.A.R.T., 60-bit/1K Bytes BCH ECC
Dimensions (WxDxH): 2.7 in x 3.9 in x 0.3 in
Weight: 3.35 oz
Manufacturer Warranty: 3-year warranty
General
Device Type: Solid state drive - internal
Capacity: 32 GB
NAND Flash Memory Type: Multi-level cell (MLC)
Form Factor: 2.5"
Interface: SATA 6Gb/s
Features: Native Command Queuing (NCQ), shock-resistant, flash bad-block management, TRIM support, StaticDataRefresh Technology, Advanced Power Shield, Advanced Garbage Collection, Error Correction Code (ECC), DDR3 DRAM Cache, DEVSLP SATA low power mode, Advanced Global Wear Leveling, Transcend TS6500 controller, S.M.A.R.T., 60-bit/1K Bytes BCH ECC
Width: 2.7 in
Depth: 3.9 in
Height: 0.3 in
Weight: 3.35 oz
Performance
Drive Transfer Rate: 600 MBps (external)
Internal Data Rate: 230 MBps (read) / 40 MBps (write)
4KB Random Read: 20000 IOPS
4KB Random Write: 10000 IOPS
Reliability
MTBF: 1,500,000 hours
Expansion & Connectivity
Interfaces: 1 x SATA 6 Gb/s - 22 pin Serial ATA
Compatible Bay: 2.5"
Miscellaneous
Compliant Standards: BSMI, FCC, RoHS, IEC 60068-2-27, IEC 60068-2-6, JESD-219, JESD-218A
Manufacturer Warranty
Service & Support: Limited warranty - 3 years
Environmental Parameters
Min Operating Temperature: -40 °F
Max Operating Temperature: 185 °F
Min Storage Temperature: -40 °F
Max Storage Temperature: 185 °F
Humidity Range Operating: 0 - 95%
Shock Tolerance (operating): 1500 g @ 0.5 ms
Shock Tolerance (non-operating): 1500 g @ 0.5 ms
Vibration Tolerance (operating): 5 g @ 5-800 Hz
Vibration Tolerance (non-operating): 20 g @ 5-800 Hz